Release agent

For the manufacture of thermoset and thermoplastic fibre composite components we stock semi-permanent release agents for standard applications and special high-temperature release agents with a temperature resistance up to 400 °C.

Easy to use
No waxing or polishing
High-gloss finishes
Free from silicone oils – hardly any transfer of release agent to the moulded parts
Bonding, varnishing etc. without post-treating the moulded parts
No build-up of release agent in the mould

Our semi-permanent release agents work very differently to traditional wax-based release agents: they consist of polymers that form a thin anti-adhesive film of just a few µ on the mould surface.

The moulds must be cleaned thoroughly before first use to ensure a good bond of this film on the mould surface: any grease and wax must be completely removed from the surface. The coating not only dries out, but also bonds with the surface and the better it can harden, the more stable it becomes.

We recommend our solvent-based sealer for the first application. However, you can also just work with the release agent and not use any solvents at all (only TREN’S WS200).

	Medium	package sizes	resin compatibilty	type	complementary - achievable Q
Cleaners
Chemlease® Mould Cleaner EZ		[700G], [3.8KG], [14KG]
Chemlease® Mould Cleaner 1009 W	water	[4L]		solvent-free, abrasive	not for high gloss
Chemlease® Mould Cleaner 1010 W	water	[4L]		solvent-free	post operations on parts possible
Fillers
Chemlease® LFC2208W		[800G], [3.8KG]	not chemical resistant - needs coverage by MPP	no release
Primers
Chemlease® MPP-1L (matt)		[800G], [3.8KG]	UP, VE, EP, BMI, PU	no release	Satin, Matte finish
Chemlease® MPP 2740W (matt)	water	[3,73KG]	UP, VE, EP, BMI, PU	no release	Satin, Matte finish
Chemlease® MPP 712 EZ (gloss)		[930G], [3.88KG]	UP, VE, EP, BMI, PU	no release	Top Coats – (High Gloss)
Chemlease® MPP 2684W (gloss)	water	[3,76KG]	UP, VE, EP, BMI, PU	no release	High Gloss - chemical resistance high
Sealers
Chemlease® 15 Sealer EZ		[710G] [3.5KG] [14,3KG] [150KG]	n/a		high gloss
Chemlease® Sealer 2697		[780G] [3,8KG]	n/a	HAPs free	high gloss
Chemlease® Sealer 2736W	water	[951G] [3,81KG]	n/a		medium gloss
Chemlease® Sealer 2766W	water	[1KG] [5KG]	n/a		abrasion resistant, high gloss
Release Agents solventbased
Chemlease® PMR EZ		[690G] [3.4KG] [13,9KG] [147KG]	hot or cold plastic/composites	semipermanent	Top Coats – (High Gloss)
Chemlease® PMR-90 EZ		[680G] [3.4KG] [13,4KG]	hot or cold plastic/composites, excellent slip	semipermanent	Top Coats – (High Gloss)
Chemlease® 2185 (wax-hybrid)		[690G] [3.4KG]	UP, EP, PH	semipermanent	GelCoats - high gloss when polished
Chemlease® 41 EZ		[690G] [3.4KG]	any type of pre-preg, UP , VE	semipermanent	Non-Class A Finish
Chemlease® 41-90 EZ		[680G] [3.4KG] [13,4KG] [150KG]	any type of pre-preg, UP , VE, excellent slip	semipermanent	Non-Class A Finish
Chemlease® R&B EZ		[690G] [3.5KG]	EP, PH, VE, BMI, silicone bladders, membranes	semipermanent, HAPs free	Top Coats – Non-Class A Finish
Chemlease® 255		[710G] [3.54KG] [13,4KG] [155KG]	EP, UP, PPS, rubber, non silicone	semipermanent	robust, low transfer
TREN'S HT 400+		[1ltr [5ltr] [20ltr]	high-end thermoplastics like PEEK, PPSU, etc.	semipermanent	best release at application >100°C up to 400°C, minimal transfer to the part
Release Agents waterbased
Chemlease® 825WB	water	[1KG] [5KG] [18KG]	EP, PH, minor transfer to part	semipermanent	low transfer to part
Chemlease® 2754W	water	[1KG] [5KG]	multipurpose	semipermanent	best release at application >100°C, minimal transfer to the part
Chemlease® A2191 W	water	[1KG] [5KG] [18KG] [200KG]	EP, PH, PEEK, NO Gelcoat!	semipermanent	Very low transfer to the part
Internal Release Agents
Chemlease® IC-25		[950G] [4,75KG] [18KG] [190KG]	EP		VARI, Pultrusion
Chemlease® IC-60		[1KG] [5KG] [193KG]	EP, UP, VE		VARI, Pultrusion